Fix n Save Check a Trade, Dishwasher repairs in Bournemouth

26/02/15
Load Size
It is important not to overload your washing machine as doing so can lead to inferior wash results and, in very extreme cases, possible damage to your laundry.
We recommend that you leave about an 8-10cm gap between the top of the laundry and the top of the door opening or, a hand-width approximately. This space allows the laundry to move correctly in the drum and for water to flow through the clothing getting them properly cleaned and rinsed.

Program Selection
When selecting a wash program we recommend the normal cotton 40˚C wash for most everyday clothing. This program offers a good balance of time, care and performance as well as energy use.
For low temperature washing (less than 40˚C) you will need to use a detergent that is designed for washing in low temperature.
For bedding, towels and the like we strongly recommend washing using a program set to 60˚C or higher with a bleach containing detergent wherever possible. Doing this kills mites etc as well as helping to maintain the internal cleanliness of your washing machine.
Delicate items such as wool, many modern mixed fabrics and synthetics require to be washed with special gentle or fine detergents. Using normal detergents to wash these delicate items can result in permanent damage to your garments. Please select one of the delicate wash cycles to wash delicates as the stronger wash action on more robust cycles can also cause damage to delicate items.
Quick wash programs are designed for refreshing items that have not been worn or very lightly soiled items only. Quick wash cycles are not recommended for normally soiled clothing.

Spin Speed Selection
In some respects spin speed selection is a matter of personal preference however, if you intend to tumble dry or dry the washed garments in a tumble dryer or one of our drying cabinets, we would recommend a high spin speed is used when possible.
Where you intend to line dry reducing the spin speed will reduce energy use as well as also reducing creasing, making items easier to iron and requiring less energy.
Do however take note of the recommendations on the garment care label as many items, especially delicate clothing, can be damaged if you use a high spin speed inappropriately.

Maintenance Wash
We recommend that you occasionally carry out what is known as a "maintenance wash" to clean the inner tank of your washing machine. Although, unlike most other washing machines, ours is entirely constructed from stainless steel and is far less susceptible to the build up of bacteria it is considered to be best practice.
To do so is very simple, just use a bleach containing detergent that you would use for whites and lights as a normal load, select the highest wash temperature possible and run the wash cycle with no load in the drum.
This process clears out any detergent residues, bacteria and so on helping to maintain your washing machine internally.

External Cleaning
To clean the external case and control panel of your washing machine please avoid using harsh chemical cleaners, particularly on the control panel. 
The control panel, in order to maintain it's looks and stencilling, requires to be cleaned with a cloth and water, we find that a good microfibre cloth and water is normally sufficient however a mild non-abrasive detergent can be used if needed.
For the main casing, door and so on we recommend a non-abrasive detergent and a cloth to clean.
The use of harsh chemical products or abrasive cleaners may cause permanent damage and should be avoided.
Pay particular attention to the soap dispenser and ensure that this is cleaned regularly and do not allow a build up of detergent residue or conditioner residues to form as, for some, these can react chemically and cause staining or damage to the dispenser front in more extreme cases.
    
22/02/15
To help you get the most out of your dishwasher, we’ve come up with a handy list of top tips so you get the best clean, time after time.

Stacking order
Generally larger and dirtier items are best on the bottom rack, cups, glasses and less soiled items should be put on the top rack.
 
Get rid of excess food
Always scrape off excess food before loading, and use the pre-wash programmed on heavily soiled items.
 
Small loads
When you only have a small load to wash, it’s best to use a half load programmed. This will cut down on water usage and also means you don’t have to wait days for the dishwasher to be full.
 
Cutlery
With cutlery, make sure to avoid nesting so that water can rinse over all surfaces. Have some standing upright and some facing downwards. Since safety comes first, long or sharp knives should face downwards.
 
Crystal
Check what type of crystal you have, and do not put lead crystal in a dishwasher — this should always be hand-washed. However, you can put many other types of crystal in the dishwasher on a low-temperature.
 
Dishwasher safe
When buying new cutlery and products that will need to be washed, have a look on the back or check the packaging to make sure they’re dishwasher safe. Most kitchen products are dishwasher safe, but not always.
 
Loading plates
Load and position dishes securely so that they do not knock against each other, helping to avoid damages. When stacking deep plates, try to angle them so the water can run off, allowing for a better clean and as well as being easier to dry.
 
Tough stains
To clean heavily soiled items like pots, pans and cookware, wash them in an intensive cycle with a higher temperature to get rid of tough stains.
 
Look after your glasses
To help prevent glass erosion, only clean your glasses at low wash temperatures. Check the dishwasher manual to find out more about the glass or gentle programs.
 
Prevent unwanted smells
Regularly clean out your filter to prevent unwanted smells and to stop food clogging up the filter. If you regularly clean your filter you will have a cleaner wash and get better results from your dishwasher.
 
Dishwasher salt
Make sure you use dishwasher salt rather than table salt when topping up the salt in your dishwasher, and always use the filter when filling the salt, otherwise your next wash will taste of salt if it drops into the base of the unit. If you do happen to drop salt into the base, do a quick rinse to remove it.
 
Perfect glasses
If your glasses aren’t being cleaned properly even after cleaning the filter, try using a special glass product such as Finish Dish and Glass Protector or Finish Rinse Aid.
 
Don’t pre-rinse
Before you put anything in the dishwasher, scrape off the large food particles and but do not pre-rinse under a tap. Your dishwasher will perform a pre-rinse, and the detergent will actually cling onto the food to help wash it away. A pre-rinse before putting dishes in the dishwasher actually uses more energy, thus making it more expensive.
 
Economy washes
Economy programmes, although potentially energy and water saving, may not give the best results if you have heavily soiled items to wash or if you want the drying facility to operate. It’s best to read the manufacturer’s manual so you can best understand the different dishwasher programmes for the most appropriate, efficient rinse.
 
19/02/15
Our pick of what we consider to be some of the best quality domestic appliances on the market today. You will often find many of the products here recommended by the engineers in the forums, with good reason. 

What we do is not to seek the cheapest appliances but the best value and performance on the appliances that will last for years, often beyond what the competition offers as well as low running and maintenance costs should it be required. This means that the overall cost of ownership is lower over the life of the machines that we sell. 

We also strongly favour appliance that are backed with solid and long warranties proving that they are designed to last. 
This is why there is a limited choice of appliances, as we only sell what we consider to be good, solid and dependable products in each pricing area.

 
18/02/15
What You Need
Oven, Baking soda, Water, Rubber gloves, Damp dish cloth,Plastic or silicone spatula, Spray bottle
White vinegar
Instructions
Remove your oven racks, pizza stone, oven thermometer, and anything else you have inside the oven. Set aside.
Make a baking soda paste: In a small bowl, mix a 1/2 cup of baking soda with a few tablespoons of water. Adjust the ratio of both as needed until you have a spreadable paste. 
Coat your oven: Spread the paste all over the interior surfaces of your oven, steering clear of the heating elements. Use gloves for this portion as the oven is pretty grimy. The baking soda will turn a brownish colour as you rub it in; it also might be chunkier in some places than others. That is fine. Just try to coat the whole oven to the best of your abilities, paying attention to any particularly greasy areas. 
Let it sit overnight: Allow the baking soda mixture to rest for at least 12 hours, or overnight.
Clean your oven racks: Meanwhile, clean your oven racks. 
Wipe out the oven: After 12 hours or overnight, take a damp dish cloth and wipe out as much of the dried baking soda paste as you can. Use a plastic or silicone spatula to help scrape off the paste as needed. 
Put a little vinegar in a spray bottle and spritz everywhere you still see baking soda residue in your oven. The vinegar will react with the baking soda and gently foam. 
Do a final wipe down: Take your damp cloth and wipe out the remaining foamy vinegar-baking-soda mixture. Repeat until all the baking soda residue is gone. Add more water or vinegar to your cloth as needed while wiping to really get the oven clean and shiny.
Replace your oven racks: Replace the oven racks and anything else you keep in your oven, and you're done!
 
03/02/15
Great news for all our Fix 'n' Save fans, we have a new website. You can now read up on our latest news, see what previous customers have had to say, view our gallery and contact us with just the click of a button.